Seal Coating in North Bay Shore, NY

Your Driveway Stays Protected for Years

Professional seal coating that prevents cracks, blocks water damage, and keeps your asphalt looking fresh.

A person is applying grey tile adhesive with a notched trowel, laying large rectangular tiles in a staggered pattern. Red spacers are visible between the tiles.

Hear from Our Customers

A construction worker in a gray hoodie and gloves is bending over, placing rectangular paving stones on the ground to build a sidewalk or patio. Tools and construction materials are visible in the background.

Professional Driveway Sealing Services

What Proper Seal Coating Actually Does

You’re not just getting a coat of black paint on your driveway. Real seal coating creates a protective barrier that stops water from seeping into cracks where it freezes and expands. It blocks UV rays that make asphalt brittle and gray. It resists oil stains and salt damage from our Long Island winters.

When it’s done right, your driveway looks like new again. That rich black color comes back, small cracks get filled and sealed, and the surface becomes smooth. More importantly, you’re preventing the kind of damage that leads to expensive repairs or complete replacement down the road.

The difference between a sealed driveway and an unsealed one becomes obvious after just one winter. While your neighbors deal with new cracks and fading, your asphalt stays intact and protected.

North Bay Shore Sealcoating Company

We Know Long Island Asphalt

We’ve been protecting driveways and parking lots across Long Island for years. We understand what salt air and harsh winters do to asphalt around here. We’ve seen what works and what doesn’t.

Our team uses commercial-grade sealers and equipment, not the hardware store stuff that peels off after six months. We know when conditions are right for application and when to wait. Every job gets proper surface preparation because shortcuts always show up later.

North Bay Shore property owners trust us because we do the work right the first time. No surprises, no comebacks, just driveways that stay protected year after year.

Stacks of gray concrete paving stones on the ground next to an unfinished pathway, with some pavers already laid in place; yellow sand and soil are visible nearby.

Our Asphalt Sealing Process

Here's Exactly What We Do

First, we clean your driveway completely. Oil stains get treated, debris gets removed, and we blow out all the cracks. This step matters because sealer won’t bond properly to dirty surfaces.

Next comes crack filling. We use hot rubberized crack filler for anything larger than hairline cracks. This prevents water penetration and gives you a smooth surface. Small cracks get sealed by the coating itself.

Then we apply the sealer using professional spray equipment or squeegees, depending on your surface. We work in sections to ensure even coverage and the right thickness. Too thin and it won’t protect. Too thick and it won’t cure properly.

The whole process takes a few hours for most driveways. You’ll need to stay off it for 24-48 hours depending on weather, but then you’re back to normal with a driveway that’s protected for the next 2-3 years.

Three construction workers in work clothes and kneepads stand on a partially completed outdoor stone patio near steps, with tools and a black toolbox nearby. Their upper bodies are mostly out of frame.

Ready to get started?

Explore More Services

About All Purpose Paving | Serving all of Suffolk County, NY

Get a Free Consultation

Complete Blacktop Sealing Service

What's Included in Every Job

Every seal coating job includes thorough cleaning, crack filling, edge work, and two coats of premium sealer. We don’t cut corners on surface prep because that’s where most problems start. Oil stains get pre-treated, and we hand-detail areas around garage doors and walkways.

We only work when conditions are right. Temperature needs to be between 50-85 degrees with no rain in the forecast for 24 hours. Humidity matters too. We’d rather reschedule than compromise the quality of your job.

You get a clear timeline upfront and updates if weather changes our schedule. We protect your landscaping and clean up completely when we’re done. Your driveway will be ready for North Bay Shore’s next winter, and you’ll know exactly when it needs attention again.

A construction worker wearing gloves, knee pads, and boots is crouched down, placing gray paving stones onto gravel at a work site. Dirt and tools are visible in the background.
Most driveways in North Bay Shore need seal coating every 2-3 years. Our coastal location and harsh winters with road salt mean asphalt takes more abuse than inland areas. If your driveway gets heavy use or full sun exposure, you might need it every 2 years. Light use driveways in shaded areas can often go 3 years between coats. The key is watching for signs like fading color, small cracks appearing, or water soaking in instead of beading up. Don’t wait until you see major cracking because then you’re looking at repairs, not just maintenance.
Late spring through early fall works best, but the specific timing depends on weather conditions, not just the calendar. We need temperatures between 50-85 degrees with no rain for 24 hours after application. Late April through October usually gives us the right conditions, but we watch the forecast carefully. Avoid the hottest summer days when sealer can dry too fast, and never seal coat if there’s any chance of rain or if temperatures will drop below 50 degrees overnight. The sealer needs time to cure properly, and rushing because of weather always causes problems.
Small cracks, yes. Potholes and major damage need repair first. Hairline cracks get sealed by the coating itself, but anything wider than a quarter-inch gets filled with hot rubberized crack filler before we apply the sealer. This prevents water from getting underneath and causing more damage. Potholes, large cracks, or areas where the asphalt is breaking apart need proper patching first. Seal coating over major damage just hides the problem temporarily and wastes your money. We’ll tell you honestly what needs repair and what can be handled with just seal coating.
Plan on staying off your driveway for 24-48 hours, depending on weather conditions. Hot, dry, breezy days mean faster curing, while cool or humid conditions take longer. We’ll give you a specific timeline based on the forecast when we finish your job. You can usually walk on it after 4-6 hours, but car tires will leave marks if you drive on it too soon. The sealer might look dry on top but still be soft underneath. It’s better to wait an extra day than to have tire marks permanently embedded in your new seal coat.
The biggest difference is usually in materials and preparation work. Cheap jobs use thin, watered-down sealer that won’t last through one Long Island winter. Quality sealers cost more but provide real protection. Some companies skip surface cleaning or don’t fill cracks properly, which saves them time but guarantees problems later. Professional equipment also costs more to operate than basic squeegee application, but it gives better, more even coverage. You’re not just paying for the black coating – you’re paying for proper prep work, quality materials, and application that actually protects your investment.
Yes, quality seal coating will restore that rich black color and make your driveway look new again. Asphalt turns gray when UV rays break down the surface oils and when weather wears away the fine particles. Seal coating replaces that protective layer and brings back the deep black appearance. However, if your asphalt is severely weathered or has been neglected for many years, it might need extra preparation or even repairs before seal coating. The coating works best on structurally sound asphalt that just needs surface protection and color restoration.