Seal Coating in Holbrook, NY

Protect Your Asphalt Investment Today

Professional seal coating that extends your driveway’s life and keeps it looking sharp for years.

Hear from Our Customers

Driveway Sealing Holbrook Services

What Proper Seal Coating Does

Your driveway stops looking worn and faded. Instead of watching cracks spread and asphalt crumble, you get a smooth, deep black surface that actually protects itself.

Seal coating creates a barrier against water, oil, and UV damage. That means fewer repairs, less cracking, and years more life from your existing asphalt. The difference isn’t just cosmetic—though your property will definitely look better.

You’re avoiding the bigger headache. Without protection, small cracks become big problems. Water gets in, freezes, and turns minor issues into expensive repairs. Seal coating stops that cycle before it starts.

Holbrook Asphalt Sealing Experts

We Know Long Island Asphalt

We’ve been handling driveways and parking lots across Long Island for years. We’ve seen what works and what doesn’t when it comes to protecting asphalt in our climate.

Long Island weather is tough on pavement. Hot summers, harsh winters, and everything in between. We use materials and methods that actually hold up here, not generic solutions that might work somewhere else.

You’re dealing with a local crew that shows up when scheduled and does the work right. No surprises, no shortcuts, no wondering if we’ll be around next year when you need us.

Sealcoating Process Holbrook NY

Here's How We Handle It

First, we clean your asphalt thoroughly. That means removing dirt, debris, and any vegetation growing in cracks. If there are oil stains, we treat those separately because sealer won’t stick to contaminated surfaces.

Next, we fill any cracks wider than a quarter-inch. Small cracks get sealed by the coating itself, but bigger ones need attention first. This prevents water from getting underneath and causing problems later.

Then we apply the sealer using professional spray equipment or squeegees, depending on your surface. Two thin coats work better than one thick one. The first coat penetrates, the second coat provides the protective layer. You’ll need to stay off the surface for 24-48 hours while it cures completely.

Ready to get started?

Explore More Services

About All Purpose Paving | Serving all of Suffolk County, NY

Get a Free Consultation

Blacktop Sealing Holbrook Services

What's Included in Our Service

Every seal coating job starts with proper surface preparation. We’re not just spraying sealer over whatever’s there. You get thorough cleaning, crack filling where needed, and edge work around garage doors and walkways.

We use commercial-grade coal tar or asphalt emulsion sealers—not the thin stuff you’d buy at a hardware store. These products are designed for Long Island’s climate and traffic conditions. They penetrate deeper and last longer.

You also get realistic timing expectations. We don’t work in wet weather or when temperatures are too low. Rushing the job means poor results, and we’re not interested in doing callbacks because we tried to beat the weather.

How often should I seal coat my driveway in Holbrook?

Most driveways in Holbrook need seal coating every 2-3 years, but it depends on traffic and exposure. A driveway that gets heavy use or sits in full sun all day might need attention every two years. One that’s mostly shaded with light traffic can go three years or more. The key is watching for signs like fading color, small cracks appearing, or rough texture developing. Don’t wait until the asphalt looks completely worn out—that means you’ve waited too long and might need more extensive repairs before sealing.

What's the best time of year for driveway sealing on Long Island?

Late spring through early fall gives you the best results in our area. We need temperatures consistently above 50 degrees and no rain in the forecast for at least 24 hours after application. May through September is typically ideal, with early fall being especially good because there’s less chance of unexpected weather. Avoid sealing in winter or early spring when temperatures fluctuate dramatically—the sealer needs stable conditions to cure properly. Summer works fine as long as we’re not applying during the hottest part of the day when sealer can dry too quickly.

How long does seal coating take to dry completely?

You can usually walk on sealed asphalt after 4-6 hours if conditions are good, but keep cars off for at least 24 hours. Full cure takes 48-72 hours depending on temperature and humidity. Hot, dry weather speeds things up. Cool or humid conditions slow them down. We’ll give you specific timing based on the forecast when we do your job. Don’t rush it—driving on sealer that hasn’t fully cured can leave tire marks or damage the protective layer you just paid for.

Can you seal coat over existing cracks in my asphalt?

Small cracks, yes. Larger ones need to be filled first. Hairline cracks and minor surface crazing will get sealed over without problem. But cracks wider than a quarter-inch should be cleaned out and filled with crack filler before we apply sealer. Otherwise, they’ll just telegraph through and continue spreading. If your driveway has extensive cracking or structural issues, seal coating might not be the right solution—you might need repairs or replacement instead. We’ll let you know what we’re seeing when we look at your specific situation.

Is seal coating worth it compared to just replacing my driveway?

If your asphalt is structurally sound, absolutely. Seal coating costs a fraction of replacement and can add 3-5 years to your driveway’s life. A typical seal coating job runs a few hundred dollars versus several thousand for replacement. But if your base is failing, you have major drainage issues, or more than 30% of the surface is severely cracked, replacement might make more sense. We’ll be honest about what we’re seeing—there’s no point in seal coating asphalt that’s beyond help.

What should I do to prepare my driveway for seal coating?

Move your cars and anything else off the driveway the night before we arrive. We’ll handle the cleaning and prep work, but we need clear access to the entire surface. If you have oil stains, point them out to us—they need special treatment. Trim back any vegetation growing along the edges so we can seal right up to the borders. Make sure your sprinkler system won’t turn on during or after the application. That’s about it—we’ll take care of the technical preparation like cleaning and crack filling.

Local Resources

Holbrook, NY is located in Suffolk County in New York State