Seal Coating in Deerfield, NY

Your Driveway Looks New Again

Professional seal coating that protects your investment and restores that fresh blacktop appearance you remember.

A person is applying grey tile adhesive with a notched trowel, laying large rectangular tiles in a staggered pattern. Red spacers are visible between the tiles.

Hear from Our Customers

A construction worker in a gray hoodie and gloves is bending over, placing rectangular paving stones on the ground to build a sidewalk or patio. Tools and construction materials are visible in the background.

Professional Driveway Sealing Services

Stop Watching Your Asphalt Deteriorate

You know that sinking feeling when you pull into your driveway and see another crack forming. Or when the black asphalt has faded to gray and looks tired compared to your neighbor’s fresh pavement.

Seal coating stops that deterioration in its tracks. Instead of watching small cracks turn into major problems, you get a protective barrier that keeps water out and prevents freeze-thaw damage that destroys driveways in New York winters.

Your driveway goes from looking worn and neglected to looking like it was just installed. The rich black finish makes your entire property look well-maintained, and you avoid the headache and expense of major repairs down the road.

Deerfield Asphalt Sealing Experts

We Know Deerfield Driveways

All Purpose Paving has been protecting asphalt surfaces throughout the Deerfield area for years. We understand how harsh New York winters affect your pavement and what it takes to keep driveways and parking lots in top condition.

We’re not the guys who show up, slap some sealer down, and disappear. We prepare surfaces properly, use commercial-grade materials, and apply sealcoating when conditions are right for the best results.

You’ll find us working in neighborhoods throughout Deerfield because property owners know we deliver consistent results without the runaround.

Stacks of gray concrete paving stones on the ground next to an unfinished pathway, with some pavers already laid in place; yellow sand and soil are visible nearby.

Our Seal Coating Process

Here's Exactly What We Do

First, we clean your driveway thoroughly, removing dirt, debris, and any loose material that would prevent proper adhesion. We fill cracks and repair any problem areas so the surface is ready for sealing.

Next, we apply the sealcoating using professional equipment that ensures even coverage. We’re not rolling it on with a brush from the hardware store – we use commercial-grade applicators that create a smooth, consistent finish.

The sealer needs proper curing time, so we’ll let you know exactly when you can drive on it again. Most driveways are ready for light traffic within 24 hours, but we’ll give you specific timing based on weather conditions and the sealer we’re using.

Three construction workers in work clothes and kneepads stand on a partially completed outdoor stone patio near steps, with tools and a black toolbox nearby. Their upper bodies are mostly out of frame.

Ready to get started?

Explore More Services

About All Purpose Paving | Serving all of Suffolk County, NY

Get a Free Consultation

Complete Asphalt Protection Services

More Than Just Seal Coating

When we seal coat your driveway, you’re getting a complete asphalt maintenance service. We handle crack filling, surface preparation, and proper application all in one visit.

We work with both residential driveways and commercial parking lots throughout Deerfield. Whether you need a single driveway sealed or multiple surfaces at a commercial property, we bring the same attention to detail and quality materials.

Our sealcoating protects against oil stains, water damage, and UV rays that break down asphalt over time. You’re not just getting a cosmetic improvement – you’re extending the life of your pavement and avoiding expensive replacement costs.

A construction worker wearing gloves, knee pads, and boots is crouched down, placing gray paving stones onto gravel at a work site. Dirt and tools are visible in the background.
Most driveways in Deerfield need seal coating every 2-3 years, depending on traffic and weather exposure. If your driveway gets heavy use or faces south where it gets more sun, you might need sealing every 2 years. Driveways with lighter traffic can often go 3 years between applications. The key is watching for signs like fading color, small cracks forming, or water soaking into the surface instead of beading up. When you start seeing these signs, it’s time to seal coat before damage gets worse.
Late spring through early fall works best for seal coating in New York. We need temperatures above 50 degrees and no rain in the forecast for at least 24 hours after application. The ideal conditions are warm, dry days with low humidity. We avoid sealing during the hottest summer days because the sealer can dry too quickly and not cure properly. Most of our seal coating work happens from May through September when weather conditions are most predictable and favorable for proper curing.
You can usually walk on sealed pavement within 4-6 hours, but we recommend waiting 24 hours before driving on it. Full curing takes 48-72 hours depending on temperature and humidity. Hot, dry weather speeds up the process while cool, humid conditions slow it down. We’ll give you specific timing based on the weather forecast and what we see when we finish your job. It’s better to wait an extra day than risk tire marks or damage to the fresh sealer.
We fill cracks as part of our seal coating process, but larger cracks need proper repair first. Small cracks under a quarter-inch wide get filled with crack sealer before we apply the coating. Bigger cracks or areas where the asphalt is breaking apart need more extensive repair work. We’ll walk your driveway and point out any problem areas that need attention before sealing. Trying to seal over major cracks without fixing them first just wastes your money because the problems will show through quickly.
Seal coating typically costs between $0.15 and $0.25 per square foot, depending on the condition of your driveway and any prep work needed. A typical residential driveway runs $200-400 for seal coating. That’s a fraction of what you’d pay for asphalt replacement, which runs $3-5 per square foot. We provide free estimates so you know exactly what to expect. The investment in seal coating every few years saves thousands compared to letting your driveway deteriorate and need replacement.
You don’t need to be home during the actual seal coating work, but we do need access to water and want to walk through any specific concerns beforehand. We’ll also need to coordinate timing so you can move vehicles off the driveway before we start. Most jobs take 2-4 hours depending on size and prep work needed. We’ll give you a clear timeline and let you know when you can expect us to finish so you can plan accordingly for when the driveway will be available again.